123.Hp.Com AMP 100

Best-in-Class HP AMP 100 Printer Setup

HP AMP 100 printer setup

The HP AMP 100 printer is a personal inkjet color printer. It uses HP Thermal InKjet technology. It operates with two cartridges. It offers wired and wireless connectivity. It features HP ePrint and Wireless Direct Printing and supports AirPrint. It has a recommended monthly volume of 50-200 pages. The HP AMP 100 printer setup has an input tray capacity of 60 sheets and an output tray capacity of 25 sheets. It delivers printouts at 18.5 ppm and 5.5 ppm for black and color A4 size printouts in draft mode.

First Time HP AMP 100 Printer Setup

Follow the instructions listed below to set up your HP AMP 100:

  • Unpack the printer from the box. Take out the plastic wrap from the printer. Attach the power cord to the back of the printer, and then fix the other end of the power cord into an electrical outlet.
  • Switch on the printer. Draw open the ink cartridge access door. The carriage moves to the middle of printer.
  • Once the carriage is quiet and inactive, proceed further. Unpack the new cartridge. Hold the cartridge only by the black plastic region. Peel off the plastic tape from the HP AMP 100 ink cartridge.
  • Hold the ink cartridge by its sides with the contacts pointing toward the printer, insert the ink cartridge into its slot, and then gently push the ink cartridge until it locks into position.
  • Repeat this procedure for the other ink cartridge. Shut the ink cartridge access door.
  • Lift the input tray and the input tray extender. Force the input tray shield back and hold it, glide the paper width guide to the its extreme position on the left and then let go of the input tray shield.
  • Place up to 60 sheets of blank white paper into the input tray, and then push the stack of paper down until it halts.
  • Force the input tray shield back and hold it, glide the paper width guide to the right until it halts at the edge of the paper, and then let go of the input shield.
  • Push out the output tray and the output tray extender, and then raise the paper catch.
  • Download and install the full feature HP AMP 100 Printer setup driver and software to complete the setup.

HP AMP 100 Printer Driver Download

You will need to install the full feature HP AMP 100 Printer Driver and software to get the best out of your HP AMP 100. Drivers are crucial for the effective functioning of your HP printer. Follow the instructions listed below to download and install the HP AMP 100 Driver and software for Windows and Mac operating systems.

HP AMP 100 Printer Driver For Windows

  • You can download the full feature printer driver and software from our website. If your HP printer has scan functionality, make sure to install the Full feature Printer Driver and software package that includes HP Scan or HP Easy Scan. This will let you use the full functionality of your printer.
  • Your file will download in .exe format. Before the download starts, you will be prompted to choose Run, Open or Save.
  • Choosing Run or Open will launch the file immediately after it downloads. Choosing Save will store the file on your computer so that you can retrieve it later.
  • Choose Save. You will be able to see the estimated time for your download to complete in the Downloads bar of your browser.
  • Once the download completes, launch the installer from the Downloads bar of the browser or the Downloads folder of your computer.
  • Follow the on-screen prompts to complete the installation. If asked, connect the HP AMP 100 printer setup to the computer.

HP AMP 100 Driver Download for Mac 

  • Download the full feature printer driver and software from our website. If your printer possesses scan functionality, make sure to install the printer Driver and software package that contains HP Scan or HP Easy Scan. This will let you access the full functionality of your printer.
  • Your file will be downloaded in .dmg format. You will be required to choose Run, Open or Save.
  • Choosing Run or Open will launch the installer immediately after it downloads. Choosing Save will store the file in your computer so that you can retrieve it at a later point of time.
  • Choose Save. Once the download completes, launch the installer. Follow the on-screen prompt to complete the installation.
  • If you are required to add the Printer to the printer queue, select HP AMP 100, select the Use or Print Using menu, select HP AMP 100 in the pop-up menu, and then select Add.
  • Go back to the HP installer to finish the installation. Attempt to print, scan or fax, based on your printer’s capability.

Refill HP AMP 100 Printer Ink Cartridges

Follow the instructions listed below to refill your ink cartridges:

  • Switch on the printer. Draw open the ink cartridge access door. The carriage moves to the middle of the printer. Once the HP AMP 100 Printer setup is quiet and inactive, proceed further.
  • Gently push down on the ink cartridge to free it, and then take the ink cartridge out of its slot.
  • Gather the refill ink, syringe and a piece of paper or cloth. Use the syringe to refill the cartridge.
  • Make sure not to fill the cartridge over the limits, this might cause the ink to overflow. It takes about two hours for the ink to set in the cartridge. After which, you can reload the ink cartridge.
  • Grab the ink cartridge by its sides with the contacts pointing toward the Printer, load the ink cartridge into its designated slot, and then tenderly push the ink cartridge until it locks into position.
  • Repeat this procedure for the other ink cartridge, if necessary. Shut the ink cartridge access door.