Get the Complete HP Envy 7644 setup Printer Guide

  • The HP Envy 7644 setup Printer is a wireless all-in-one printer that best suits for home and prints documents at low-cost, producing lab-quality photos, creative projects, borderless, and laser-quality documents. It is embedded with advanced mobile printing features that enable or makes it easy to print from your iPad, iPhone, or connected PC or Mac at home.
  • It is capable of printing high-quality photos from your iOS device without switching paper using separate photo paper tray. It prints high quality looking documents and photos in both black-and-white and color all for the same low price. With the 25-page automatic document feed and automatic two-sided printing, you can manage multiple pages quickly with HP Envy 7644 Printer Setup.
HP Envy 7644 setup


The HP Envy 7644 printer’s complete installation setup is elaborated in detailed stepwise process. Do as per the instructions are given to set the control panel preferences, load the paper into the paper tray, and install ink cartridges.

Step 1: Take out the printer carefully from the cardboard box and then take-off all the tapes, stickers, and the packing materials from outside of the printer, including any decals on the printer control panel. Then open the scanner lid.

Step 2: Now, take-off all the tape and the packing materials from the scanner glass and then close the scanner lid. Now, open the ink cartridge access lid, and take-off all the tapes from the HP Envy 7644 setup printer’s inside and close the lid.

Step 3: Pull open the input tray and then remove the output tray. Then remove all the packing materials from the photo tray. Then slide out the paper width guides and remove the packing materials from inside the input tray.

Step 4: Remove all the hardware and materials from the box and then discard it. Plug or connect the printer to a power source, switch-on the printer, and then set the language, country/region, date and time on the HP Envy 7644 Printer Setup control panel.

Step 5: After setting the preferences, you must load the paper into the paper tray. For that, first, pull and open the input tray. Then, push in the photo tray and slide out the paper width guides in the input tray.

Step 6: Until the paper stops, push the stack of paper into the input tray. Then gently or slowly slide in the paper width guides so that they rest against the edges of the paper. Then, push in the input tray.

Step 7: Make sure that the input tray is properly locked into its place, as it may cause paper jam errors or issues. Now, you have to install the ink cartridges that shipped in the box along with the HP Envy 7644 Setup.

Step 8: To install the ink cartridges, open the cartridge access door and the “Door Open” screen displays. Now, remove one of the ink cartridges from its package and don’t touch any other color plastic except the black one.

Step 9: Now, pull the orange tab to remove the protective tape, and then slide the new cartridge at a slight upward angle into the empty slot. Then gently push up on the cartridge until it snaps or clicks into place.

Step 10: Repeat the same process to install the other cartridges and finally close the cartridge access door. Then click the “ok” button and the printer will calibrate and align the cartridges. The HP Envy 7644 setup printer then prints an alignment page.

HP Envy 7644 Driver and Manual Download



You can quickly and easily download the driver for your HP Envy 7644 Printer Setup. Click the displayed link and you will be directed to our website, where you can select and download the driver that is compatible with your printer.

Step 1: To download the latest driver for the HP Envy 7644 from our website, click the available link. At once you will be directed to the driver download page where you can select the driver that is compatible with your printer.

Step 2: Now, click “Download” and immediately the driver starts downloading and then you are guided with a list of instructions on the screen. If any window opens in any tab, there you should choose “Open”, “Save”, or “Run” and then select format.

Step 3: Here you need to choose the format to save as .dmg for Mac and .exe for windows. To launch driver installation, you must double-click the driver file in the “Downloads folder” or “browser downloads bar” on the computer.

Step 4: Do as per the instructions that display on the screen to complete the driver download for your printer. Follow the instructions displayed on the screen to install the driver for your printer, after completing the driver download.

Step 5: Also you can easily download the driver using the CD or DVD that came with your printer and so first insert the CD into the CD drive and a list of HP Envy 7644 setup instructions appear on the screen.

Step 6: Do as per the instructions that appear on the screen and complete the driver download. Once the driver is downloaded for the printer, then do as per the instructions are guided and install the driver.


You can quickly download the HP Envy 7644 printer setup manual by clicking the displayed link and you will be directed to the manual download page. Select the latest manual and then download it.

Step 1: The manual guide provides or comprises the entire information and instructions regarding the printer. All the basic information related to the HP Envy 7644 Printer Setup is comprised in it.

Step 2: For all the printing, scanning related problems it gives simple stepwise solutions. It comprises or includes the stepwise instructions regarding the complete printer setup.

Step 3: The initial and additional setup and instructions for using the HP Envy 7644 setup printer is comprised in this manual. The information on configuring and setting up the accessibility features is included.

Step 4: The latest supplemental updates and information are included in this manual.


Check the ink level for your HP Envy 7644 setup printer on the control panel screen and if the ink is low or empty then replace the ink cartridges by following the steps given below accordingly.

  • Step 1: First you have to turn on the printer and then you should open the cartridge access door by gently lifting it up.
  • Step 2: Once you open the access door, the carriage moves to the cartridge access area. Wait till the carriage remains silent before you continue.
  • Step 3: Remove the old cartridge from its slot. On the front of the cartridge, press the tab inward to release and then remove the cartridge.
  • Step 4: Take the new cartridge package and remove the cartridge from it. Then to evenly distribute the ink, gently rock it back and forth.
  • Step 5: Then carefully pull or take-off the orange pull-tab and plastic wrap straight back completely before you twist the orange cap.
  • Step 6: Hold the cartridge on both the ends or sides and slowly twist the protective orange cap counter-clockwise to snap it off the cartridge.
  • Step 7: You should turn the cartridge, as the cartridge contacts should face downward, and it must also match the label color dot on the carriage.
  • Step 8: Load the cartridge into its slot and press it down till it clicks into its place. Follow the same process to install the other cartridges.
  • Step 9: Once done with changing or replacing the ink cartridges, close the cartridge access door. The printer then aligns cartridges and prints an alignment page.


You have connected your HP Envy 7644 setup printer to a wireless network, but the connection drops and due to this the printer loses its connection, so the printer goes offline and you cannot print or scan. Try the steps given below accordingly to troubleshoot the issue.

  • Step 1: Restart the printer and the router to troubleshoot the connectivity issues. After restarting them check if the issue is cleared.
  • Step 2: Download and follow the on-screen instructions to run the HP print and scan doctor tool to identify and resolve the problem.
  • Step 3: If the issue is still there, based on your printer control panel type, check the status of the printer's wireless light.
  • Step 4: The wireless light should be on. If the error is there, print a "Wireless Network Test Results" report to identify the exact problem.
  • Step 5: Minimize wireless channel interference, as there might be interference between the networks if several networks use the same channel to your network.
  • Step 6: If the error is still there, then try to change the HP Envy 7644 Printer Setup wireless network name as it may resolve the connectivity issues.
  • Step 7: Additional routers might cause performance issues and network interference. So check and turn off the routers that are not being used.
  • Step 8: Now, check if the issue or error is cleared, if not then place or move the printer and the router closer together.
  • Step 9: Compare the printer IP address to the router IP address using a printer Network Configuration Report and check if they are same.
  • Step 10: If they differ, then the printer is not connected properly to your wireless network. So you should restart the router and HP Envy 7644 setup printer.
  • Step 11: If the error persists still, update the printer firmware. Also, assign the printer a manual IP address and check for error.


When you try to copy from the automatic document feeder (ADF) or flatbed, the printout may have some quality issues, such as horizontal or vertical lines, poor resolution, or color bands. Try these steps to resolve the issue.

Step 1: Try to clean the scanner, as fingerprints, smudges, dust, or debris might settle on the scanner glass, under the scanner lid, or in the document feed slot which in turn may result or cause lines and color bands.

Step 2: Sometimes resetting the HP Envy 7644 Printer Setup can fix the problem. With the printer turned on, disconnect the power cord from both the printer and wall outlet. Wait for 60 seconds and connect the power cord back to the printer and wall outlet.

Step 3: If there is any paper residue or dust on the rollers or separator pad which is present inside the automatic document feeder (ADF), it may result in copy quality issues. So open the ADF, and clean the rollers and separator pad.

Step 4: If the copy settings are available, then change them as it might resolve the copy issues. All the HP Envy 7644 setup printers won’t have the option to change or alter copy quality settings, and certain printers have more or less quality options.

Step 5: If the paper size and type in the input tray is not similar to the paper size and type settings on the printer control panel, it may result in copy-related issues. If above steps didn’t resolve the issue, service the printer.


The printer does not print after you had installed the cartridges, and instead displays an error message. Under certain circumstances, the issues might occur with compatible HP cartridges too. The instructions for resolving the ink cartridge issues are given in step by step manner. Try the steps described below accordingly to overcome the ink cartridges issues.

Step 1: Remove the ink cartridges and check if any protective tape is left on the cartridges. If there remove it from the cartridges.

Step 2: Then reinsert the ink cartridges back to the empty slot and then gently push the cartridges until they suit into the place.

Step 3: Clean the electrical contacts, as if the electrical contacts have ink or debris buildup, then HP Envy 7644 setup printer might not recognize the cartridges.

Step 4: If the cartridge problem is not cleared, then try to remove, inspect and reinsert the ink cartridges again into the empty slot.

Step 5: Try to clean the electrical contacts on the cartridges and in the cartridge slots again and check if the cartridge error is cleared.

Step 6: If the error persists still, then try to reset the printer. As sometimes resetting the printer may resolve the ink cartridge issue.

Step 7: To reset, remove the power cord from the printer and the wall outlet. Wait for 60 seconds and then reconnect the HP Envy 7644 Printer Setup power cord back.

Step 8: After resetting the printer, check if the cartridge issue is solved, if not then try to replace one or both cartridges.

Step 9: First replace one cartridge and check if the problem is solved or cleared. If not solved, then try to replace the other one.

Step 10: If the above-described steps did not find a solution to the cartridge issue or problem, then try to service the HP Envy 7644 setup Printer.