Instant Guide for HP Deskjet 2622 Setup

Instant Guide for HP Deskjet 2622 Setup

The HP Deskjet 2622 Setup is designed keeping in mind the requirements of home users. Complete with a scanner, this HP Deskjet 2622 Printer Setup device can cater to the needs of every college goer for homework printing. Coupled with a scanner, this cheap device can be your ultimate money saving item.

HP Deskjet 2622 Setup

First Time DJ2622 Printer Setup

The first step to follow after receiving the printer shipment is to remove the contents and place them on a flat surface. The unboxing instructions are as follows.

Step 1: Printer Unpacking

  • The shipment is placed on a flat and sturdy counter. Remove the package and inspect the contents.
  • Remove the printer after removing all the accessories that are present in the front of the box. The DJ2622 printer is stored in Polystyrene to prevent damage during transport.

Step 2: Verify the contents of the shipment

  • A USB connector, new cartridges, power cord, user manual, and Driver installation CD are some of the accessories provided in the box. Remove the tapes that are present on the HP Deskjet 2622 Setup.

Step 3: Paper tray is loaded

  • Extend the input and output tray. Extend the paper width and paper length guide present inside the input tray is to its maximum. The paper used is fanned, stacked and then loaded in the tray.

Step 4: Power cord connection

  • Connect one end of the power cord to the rear of the DJ2622 printer and the other end to the power socket present on the wall directly.

Step 5: Cartridge installation

  • Under the cartridge, a protective tape present. Remove it. Place the cartridge in the carriage and close it which is accessed by opening the cartridge door.

Step 6: Driver HP Deskjet 2622 software installation

  • From the CD provided in the package, Install the driver software directly. To complete the installation, follow the instructions displayed on-screen.

Download the Latest HP Deskjet 2622 Printer Driver and Manual

Avail the latest version of the printer driver and manual from DJ2622 us within seconds.

Click the link to download the latest HP Deskjet 2622 Setup Driver for Windows and Mac compatible printer.

HP Deskjet 2622 Printer Setup Driver Installation

A driver is a software that helps in operating the HP wireless printer Deskjet 2622. It can be installed from the CD provided. HP Deskjet 2622 software such as the HP Install Assistant and HP Install Wizard can be used for assistance.

Run the Setup file from the website

  • Go to the website and enter your DJ2622 printer model. The driver software is a unique tool that is custom built for your device.
  • Exercise caution when downloading and choosing the operating system version. Double click the downloaded file to commence installation.
  • Choose the directory of install and select your mode of network communication. Choose between USB and HP wireless printer Deskjet 2622.
  • Follow the on-screen instructions to complete the HP Deskjet 2622 Setup process.

Run the Setup file from the disc

  • A copy of the driver software is provided in the CD that is present in the shipped package.
  • Insert the CD into your computer and commence the installation. Double-click the CD icon or wait for the auto-play to detect the CD.
  • The installation will be taken over by one of the many HP drivers install assistance software.
  • Choose your mode of network connection from the available options. Follow the instructions mentioned on-screen diligently to complete the installation. Test print a document for verification.

HP Deskjet 2622 Printer Setup for USB

The printer can be configured to be connected via USB. This allows print jobs to be sent to the DJ2622 printer from the computer that is connected to the printer via USB.

HP Deskjet 2622 USB Printer Setup Windows

Step 1: Prepare the printer

  • Make sure to keep your HP Deskjet 2622 all in one printer turned on during the setup process. Procure a USB cable with its length not lesser than 2meters and greater than 5 meters.
  • Connect the cable to the USB port present at the rear of your HP Deskjet 2622 Setup and the other end of the cable to a USB port that is in working condition in your computer. Do not use a USB hub. Make the connection directly as this will help to avoid unnecessary complications.

Step 2: USB Driver installation

  • Connect the cable to the USB port present at the rear of your printer and the other end of the cable to a USB port that is in working condition on your computer. Do not use a USB hub. Make the connection directly as this will help to avoid unnecessary complications.

HP Deskjet 2622 USB Printer Setup Mac

Step 1: Preparing the printer for USB setup

  • Turn on your HP Deskjet 2622 Printer Setup and make sure that it is in a ready state. Gather a USB cable that is not too long and not too short. It is ideal to be around 3 meters in length.
  • Connect this cable to the USB port on your printer and to a fully functioning USB port on your computer.

Step 2: Driver installation and connection steps

  • Download the driver software from the link provided by us. Type your printer model. Only the driver that is designed for your DJ2622 printer will work on it. Hence exercise caution. Select your OS version as MAC and commence the download.
  • Follow the on-screen instructions to complete the installation process. When prompted, choose USB as your network connection mode. For assistance, make use of HP Easy Start.
  • Follow the on-screen instructions to complete the installation process. When prompted, choose USB as your network connection mode. For assistance, make use of HP Easy Start.

HP Deskjet 2622 Printer Setup for Duplex printing

Duplexing is a functionality of the HP Deskjet 2622 Setup with which you can print on both sides of the paper. This cuts down on paper costs by half, saving a great deal of money.

HP DESKJET 2622 DUPLEX PRINTING FOR WINDOWS

  • Before starting the process, make sure to load sufficient paper in the input tray to avoid interrupting the print for this sake.
  • Choose a document that you want to print and in the photo viewer, open File and click Print.
  • Choose your HP wireless printer Deskjet 2622 from a list and click Printer Properties option. If you find a Printing Shortcut tab, choose Print on Both Sides option.
  • If this option is not available, go to the Print Preferences and click the Layout tab. Choose the Print on both sides option and select between Flip or page bind.
  • Click Ok and click Print. Observe the first printed page. If the alignment is a little off, remove all the sheets from the input tray and stack is on a flat counter.

HP Deskjet 2622 Duplex Printing for Mac

  • Make sure your input tray has sufficient paper in it. Open the document that is to be printed and click File and Print.
  • Click the Show Details to vary the settings. Search and click on Two-Sided selection box.
  • The method to be followed for HP Deskjet 2622 Printer Setup manual duplexing is to go to the Paper Handling menu and select Odd Only from Pages to Print menu.
  • Between Front or Rear loading, choose rear loading as it is the technology that is in use in your DJ2622 printer. This is followed by choosing between Booklet style and Tablet style.
  • In the Print Menu, select Even Only from the Pages to Print option.
  • From the Page Order, choose Automatic and click Print.

HP Deskjet 2622 Printing with black ink only

Your HP Deskjet 2622 Setup is equipped with black and color cartridges with which both color and black documents can be printer. You have to change the settings to print only with black color.

HP Deskjet 2622 Printing with black Windows

Print Only Black for one Print Job

  • Choose a document that has to be printed. Open it and click the print icon. Choose your printer from a list of printers.
  • Select DJ2622 Printer Properties on the next window that appears. In here, you are provided with various customizing options.
  • Click Black Ink Only after opening Settings. Click Advanced and pick Black & White. Click Ok to save this setting.

Printing in black for all print jobs

  • For the same settings to be applied to all your prints, go to Print Settings and open the Advanced tab found under the Print Preferences.
  • Similar to the previous option, select Black Ink Only under the Grayscale option and select Black & White option followed by All Prints option.

HP Deskjet 2622 Printing with black Mac

Printing in black for one print job

  • On your Mac computer, Open the document or photo that you want to print. Open the File option present In the top left corner. A small window opens.
  • In the opened window, select Show Details. After which, proceed to open the Grayscale option from the Paper Type option. Choose Black Ink Only in order to print with black ink only.
  • Shades of black can be varied. Go to Grayscale and select Draft. To increase the quality, choose High Quality.

Printing in black for all print jobs

  • Another option is to always print with black ink. For this, go to the Grayscale option, select Black Only. Save this setting in Presents list DJ2622.

HP Deskjet 2622 Printer not found during network setup

Due to network connectivity issues, printers are bound to run into issues such as printre Not Found During Network Setup. A few methods to rectify the issues are discussed below.

Step 1: Restart all the devices

  • Keep your printer turned on and disconnect the power cords. Reconnect them after 60 seconds. The printer will automatically turn on. Most issues plaguing the printer should be gone by now. Proceed to restart your computer and router.

Step 2: Check the network connection

  • In case of wired connection, check if the wires are intact. For wireless connections, make sure the signal strength is sufficient. Place the HP Deskjet 2622 Setup and computer close to each other and the router.

Step 3: Run HP Print and Scan Doctor

  • This Windows-only software performs a how to scan HP Deskjet 2622 and notifies you of the exiting problems with the HP wireless printer Deskjet 2622. Follow the instructions to get your HP Deskjet 2622 Printer Setup again.

Step 4: Disable the Firewall and Anti-virus

  • Anti-Virus and Firewall at times will assume your network to be not secure enough and block the incoming signal. Change the settings to selectively allow your network or temporarily disable them.

Step 5: Uninstall and reinstall the driver software

  • The driver needs to always stay updated. Enable auto update. If this doesn’t resolve the issue, uninstall the HP Deskjet 2622 Setup software and reinstall the same using recommended settings.