Get professional-quality printouts from an Officejet 7610 printer. It is a multi-functional printer which print, scan, copy and fax with ease. Print borderless photos from the printer. Connect the printer to a network either using wired or wireless connection. Use the mobile printing solutions to print from any location.

123.hp.com oj7610

Features and Specifications

  • Save 50% of paper and time using the Automatic Duplex printing option. Using the option, you are not required to flip the pages.
  • Use the printer on different platforms such as Windows and Mac operating systems.
  • Print multiple page documents at a time using the Automatic Document Feeder option. Make an easy access to the printer using the touchscreen control panel. Send the scanned documents to the printer ‘s email address with the help of scan to email option.

Wireless Setup

  • A Wireless connection is one of the secure modes of connection. It is not necessary to connect the printer to the system using any cables. Follow the instructions below to start the connection process.
  • Get the network name and password to begin the connection process. Remember that the credentials are case-sensitive.
  • Connect the printer and the system to the same wireless network. Place both devices close to a wireless router to get maximum signal strength.
  • Try to disconnect the USB cable from the printer. Use the Wireless Setup Wizard option to list out the network name in the surrounding.
  • Select your network name from the list. In case the network name is not enlisted, type the network name manually to connect the printer to a network.
  • After typing the network name, the printer urges to type the password. Once the connection is established, a wireless light on the control panel becomes stable.
  • In case the connection is not established, install the printer driver and software. You can install it using a software installation CD.
  • Based on the on-screen prompts, install the driver. Choose the connection type as Wireless. Follow the on-screen prompts to finish the process.

How to download printer driver

A driver helps to communicate between the printer and the system. To start the communication, you need to install the driver in the system. Follow the on-screen prompts to install the driver.

  • Use a software installation CD to install the driver in the system. Take out the CD and place it on the computer’s disc drive.
  • You can view a list of available files in the CD on the computer screen. Select the setup file from the list. Based on the operating system, the file format varies.
  • For a Windows system, the file format is .exe and in case of a Mac system, it is .dmg. Choose the file according to the operating system.
  • Double-click on it. After clicking the file, the installation process starts automatically.
  • Use the on-screen prompts to complete the process. In case the installation stops in the middle, you need to download the driver.
  • When you are downloading the driver, do not turn off the system and disconnect the internet. This leads to a corrupted downloaded file.
  • Call our customer support team to get the instructions regarding the download and installation process.

Replacing ink cartridges

  • Incompatible ink cartridges and low ink level lead to replacing the ink cartridges. Use the instructions below about how to replace the ink cartridges.
  • You can examine the ink level from the control panel of the printer. Tap the Ink icon to check the estimated ink level.
  • Use HP Print and Scan Doctor or HP Smart App to get the ink level status in the ink cartridge.
  • Open the ink cartridge access door. Press on the top of the cartridge to remove the ink cartridge from its slot.
  • Take out the new ink cartridge from its packaging. Do not leave the ink cartridge in open air for more than 30 minutes.
  • It can lead to ink cartridge clogs. Remove the protective tape on the top of the cartridge.
  • Do not touch the ink nozzles and electrical contacts as it leads to ink system failure.
  • Grasp the handles of the ink cartridge and move it into their respective slots. After installing them, check whether it is securely placed.
  • Once the cartridges are installed, the printer starts to print an alignment page. This is done for obtaining quality printouts.


When you start printing from the printer, it displays an error message on the control panel . Follow the solutions given below for the printhead and ink system failure issues.

Missing or failed printhead

  • Reconfigure the printer as it helps to reset the connection with the printhead and fix the error messages displayed on the control panel of the printer.
  • Switch on the printer. After a while, disconnect the power cables from the rear of the printer and from the wall socket.
  • Wait for a while and then connect the cable back to the printer and the wall socket. Then, switch on the printer by pressing the power button.
  • In case the printhead is defective or faulty, it is necessary to replace it with a new one. Try to wipe the printhead using a clean and damp cloth.
  • Due to the dust or debris accumulated in the printhead leads to printhead issue. Cleaning the printhead can help to solve the issue.
  • In case all above solutions do not fix the issue, call our technical support team to solve it immediately.

Ink System Failure

  • Examine whether the ink cartridges is authentic or compatible. In case they are not, it leads to ink system failure issue.
  • Resetting the printer can help to fix the issue. Unplug the power cable from the printer’s rear and from the wall socket.
  • Wait for a second and then connect the cable back to their respective positions.
  • Once they are connected, switch on the printer by pressing the power button. Remove the ink cartridges from their respective slots.
  • Look at the control panel for any error message. In case there is no message, then the issue is with the ink cartridge.
  • Try to replace the ink cartridges for any issue with the printer. Clean the printhead using a clean and damp cloth.
  • You can also clean it automatically using an automated tool. In case the issue occurs now and then, try to replace the printhead with a new one.
  • After that, call our technical support team to solve the issue.