setup 7610


The HP Officejet 7610, a Wide Format e-All-in-One Printer is capable of printing on paper at up to supertabloid size. It handles tabloid size for printing and scanning too. This printer suits best for a micro or home-office. If you need the tabloid-size capability, then this is a good option to go with. oj7610

Features and Specifications

  • The HP OfficeJet 7610 printer supports USB, Ethernet and wireless network.
  • This printer is compatible with mobile-printing solutions. It supports ePrint and Air Print.
  • It prints at a speed of up to 15 pages per minute for black. It prints at a speed of up to 8 ppm for color.
  • The printer is embedded with a 35-sheet Automatic Document Feeder.
  • It is compatible with both Windows and Mac Operating Systems.
  • It is capable of printing up to 12000 pages per month.
  • It is capable of scanning at a resolution up to 1200 ppi.
  • You can scan to the memory device, scan to e-mail for PDF and JPEG and scan to PC, with this printer.


The complete wireless setup procedure for the HP OfficeJet 7610 printer is described in simple steps. Do as per the steps are instructed and complete the wireless setup.

  • Gather the network name and network password, and then turn on the printer, computer, and the router.
  • After turning on the devices, check if the computer and the printer are connected to the same wireless network.
  • Also, check and remove if any USB cable is found connected to the printer and the computer.
  • To connect the printer to the wireless network, you can use the Wireless Setup Wizard on the printer.
  • On your printer control panel, you must select the “Wireless” icon.
  • Then you must select the “Settings” option.
  • Now, select the “Wireless Settings” option.
  • Select the “Wireless Setup Wizard” option.
  • Then follow the set of instructions that are displayed on the control panel screen and connect the printer to your wireless network.
  • Finally, you must download and install the printer software to complete the entire wireless setup for your printer. You can download the best driver for HP OfficeJet 7610 printer from our website.


You can download the latest version and updated driver for your HP OfficeJet 7610 printer from our website by clicking the provided link. Then follow the instructions to install the driver.

  • Step 1: Click the displayed link and you will be taken to our webpage where the printer driver is available. Enter the printer model name or number and then click the “Download” button which is available on the page.
  • Step 2: Once you click the download button, the driver starts downloading automatically and a set of instructions appears on the screen.
  • Step 3: These instructions should be followed accordingly to complete the driver download.
  • Step 4: After completing the instructions, select “Open”, “Save”, or “Run” in any windows that appeared to install the driver and then select the format.
  • Step 5: If you are a Windows user, select the format as .exe. If you are a Mac user, then select the format as .dmg. The file gets saved in the format you choose.
  • Step 6: Double-click the driver file in the “Downloads folder” or “browser downloads bar”. Then follow the on-screen prompts to finish the setup and to complete the driver installation.


When you are replacing your ink cartridges that are low or empty, you must always use the genuine ink cartridges to replace them to prevent printing issues. Follow the below steps and replace the ink cartridge.

  • Before starting the process, turn on the printer and load enough paper into the input tray.
  • Open the ink cartridge access door slowly, and the Door Open screen displays on the printer control panel with the message, ‘The cover or door must be closed to print. A Change Ink option also displays on the screen.
  • Select the “Change ink” option.
  • Slowly press the ink cartridge to release it from its slot. Remove the ink cartridge from the slot once it is released and keep it aside for recycling.
  • Remove the ink cartridge from its package and pull the orange tab to remove the protective tape.
  • Then carefully insert the ink cartridge in its slot and close the ink cartridge access door.
  • Repeat the process if required to replace another ink cartridge and finally the printer prints an alignment page.
  • Select the “Ok” option on the screen and recycle the alignment page.


If a ‘Missing or failed printhead’ or ‘ink system failure’ error message displays on the control panel screen of your HP OfficeJet 7610 printer, follow the instructions that are given below to resolve the issue.


  • If an error message ‘Missing or Failed Printhead’ displays on the control panel screen, it may lead to the ink system failure.
  • Try to reset the printer as it may reset the connection with the printhead and resolve the issue.
  • For resetting your printer, unplug the power cord from the wall outlet and the printer when it is turned on. After 60 seconds, plug the power cord back to the printer and the wall outlet.
  • The printer turns on automatically, if not then press the power button and turn on the printer. The printer goes through a warm-up period.
  • You can see the printer light flashing and the carriage moving. After resetting the printer, check if the ‘Missing or Failed Printhead’ error message is cleared.
  • If the issue is not resolved by doing the above steps, then try to service the printer.
  • For any further information or support, contact our team on the toll-free number.


  • The ‘ink system failure’ error message may occur even if your ink cartridges are not compatible with your printer.
  • The printer reset may clear the error message in certain circumstances.
  • Disconnect the power connection to the printer and after 60 seconds, reconnect it.
  • Remove the ink cartridges and check for an error message to help diagnose the printer issue.
  • Check the control panel or PC for an error message, after removing the ink cartridges out of the printhead.
  • After opening the ink cartridge access door, push in on the front of one of the ink cartridges to release it. Carefully remove the ink cartridges.
  • Now, check the control panel and if the printer displays an Ink System Failure message, then update the printer firmware.
  • Proceed to the next step, if you notice that the message has changed to Replace the Ink Cartridge.
  • Remove and reinstall the ink cartridges, and if the issue still persists then service the printer.